for Quartz Granite Marble High-End Automatic Artificial Marble Making Machine

Slab production specifications: 3350mm~2440mm*1850mm
The total power of the production line: 1200KW~1800KW
Production line length: 90m~100m
Production line width: 9m~15m 
Polishing line length: 70m~90m
Polishing line width: 6m~10m
Full line configuration: dust collecting equipment, eradicate odour equipment, Water mist collecting equipment

Operators and their patterns:

The overall configuration forms the automatic batching pattern, The operating procedure is as follows: 
The whole process of batch production need 4 workers to monitoring
1,Enter the quartz slab formula into the computer.
2,Hang the fixed tons of sand and powder in the designated sand powder feeding rack by forklift. 
3,Use the computer fills out the slab model that will be produced. 
4,The material car automatically weighing and feeding the material controlled by computer. 
5,The material car will be sent to the material spreading machine and get the hopper automatically .
6,After the mixed the materials, the lifting hopper will automatically lift the sand powder into the blender. 
7,Resin supply system is used to feed the resin into the curing agent mixer. 
8,The curing agent pump mix curing agent with the resin. 
9,After the curing agent mixed well, The curing agent mixer will add the resin of the curing agent to mix the sand powder in the stirring state. 
10,After mixing the mixed resin and sand powder, the mixer will open the stirring door automatically, then the mixture will be transported to the material bin through the crushing process.
11,The material distributor machine will mix the material into the mould uniformly.
12,After the material distribution, enter the production line mode.
13,Each material mold is first entered into 3 laminated plate mode. 
14,After the three sheets are folded, the mold folding machine will automatically put the plate into Board Moving machine. 
15,Board Moving machine push the plate into the press machine, press machine to start the shake and pressing the plates. 
16,The plate automatically enters the dividing plate machine after shake and pressing, and the plate will be separated by sheet. 
17,The separate sheet is checked and automatically enters the heat furnace of the steel plate. 
18,After curing, the plate has the system to guide automatically out of the the heat furnace and the plates been take out from the mold. 
19,The plate and mould after been seperated are respectively in the cooling line, while the cooling side walks.
20,The cooling board is automatically recognized by the mechanical hand after the designated position, and then automatically placed in the lower stack. 
21,After cooling the mold, after the automatic roller cleaning, enter the next automatic fabric mode.


The polishing production line is operated by 5 people
1,The blank sheet enters a heavy polishing mode .
2,The mechanical hand puts the plate in the heavy polishing wire rack, and the plate enters the backplate fixed thickness polishing machine.
3,After the back side of the plate been polished and pull out, the plate will be turned into the front plate thickness polishing machine. 
4,After the front side of the plate's thickness been controled , then get into the front polishing machine. 
5,After front side polished enters the four side disposable cutting saw. 
6, Enter to clean air dryer.
7,Then after quality check , automatically enters the film.Offline crib put.